Information Disclosure of 1. Energy Saving and Emission Reduction

The energy consumption in 1.2018-2020 is as follows:

Table  Energy consumption of enterprises in recent 3 years

In the process of creating a green supply chain, Jiamusi Electric Machinery Co., Ltd. carried out energy-saving transformation of steam boilers, using biomass fuel instead of raw coal, and the annual consumption of biomass particles accounted for 58.5 percent of the total energy consumption. at the same time, it also makes full use of renewable energy to replace non-renewable energy.

2. Emission reduction and carbon reduction information

(1) Air pollutants,The factory regularly tests environmental emissions every year, 2020Heilongjiang Keyang Testing Technology Co., Ltd. was entrusted with the test report of boiler exhaust gas, drying furnace in the electrical workshop after dust removal and spray bag workshop (report number: KYJC-W1924S1224；KYJC-W1924Q1224) After testing, the emission of air pollutants meets the requirements of relevant national and local standards, and the implementation standards of exhaust gas are based on the Comprehensive Emission Standard of Air Pollutants (GB16297-1996) and the Emission Standard of Air Pollutants for Boilers (GB13271-2014).

Figure Air Pollutant Test Report

Among them, the emission concentration of particulate matter, sulfur dioxide, nitrogen oxides and other pollutants at the outlet of the boiler exhaust pipe meets the limits of coal-fired boilers specified in the "Boiler Air Pollutant Emission Standard" (GB13271-2014), and the emission rate meets the "Comprehensive Air Pollutant Emission Standard" "(GB16297-1996) Level 2 or above requirements; the emission concentration of pollutants from the production workshop is lower than the emission limit of the" Comprehensive Air Pollutant Emission Standard "(GB16297-1996).

Table Air Pollutant Detection Index Parameters

(2) Water pollutants,The factory regularly tests the water body every year, 20In 20 years, Heilongjiang Keyang Testing Technology Co., Ltd. was entrusted to issue a wastewater test report. According to the "Water Quality Standard for Sewage Discharge into Urban Sewers" (GB/T31962-2015) and "Comprehensive Wastewater Discharge Standard" (GB8978-1996), the discharge of pollutants in the factory water body meets the requirements of relevant national standards and local standards. Among them, the discharge concentrations of pollutants such as chemical oxygen demand, suspended solids, and ammonia nitrogen at the total discharge outlet of wastewater all meet the requirements of the first-class standard in the "Integrated Wastewater Discharge Standard" (GB8978-1996).

Table 1 Parameters of Water Pollutant Detection Index (according to Integrated Wastewater Discharge Standard)

(3) Solid waste,The general solid waste of the factory mainly includes metal scraps, etc., which are now recycled and disposed of by waste recycling companies (Jiamusi Xinyi Steel Co., Ltd. and Jiamusi Zhongwei Industrial Co., Ltd., etc.); hazardous solid wasteCommissioned with the ability and qualifications of third-party enterprises (Heilongjiang Yunshui Environmental Technology Service Co., Ltd. and Qitaihe City Longfa Bio-oil Technology Research and Development Co., Ltd. and Qitaihe City Longfa Bio-oil Technology Research and Development Co., Ltd.) to carry out the disposal, the disposal process to implement the joint order system.

Industrial solid waste treatment agreements, contracts, and documented treatment unit qualification documents and other information are complete, and the treatment of solid waste meets the requirements of the GB18599-2001 "General Industrial Solid Waste Storage and Disposal Field Pollution Control Standards" and related standards.

Figure Business License of Hazardous Waste Disposal Unit

(4) Noise factory, the noise mainly comes from mechanical processing equipment in the production process and fan operation in environmental protection treatment facilities. According to the 2019 factory boundary noise detection report issued by Heilongjiang Keyang Detection Technology Co., Ltd., the factory boundary noise meets the Class 1 standard of GB 12348-2008 "Environmental Noise Emission Standard for Industrial Enterprises" (day: 60dB(A), night: 55dB(A).

Figure Noise Monitoring Report

Greenhouse gas emissions, the factory in accordance with the "Enterprise Greenhouse Gas Emission Accounting Methods and Reporting Guidelines (Trial)" within the scope of the plant to account for greenhouse gas emissions, and issue the corresponding self-examination report. Combustion emissions of 1771.5 tCO in 2020₂(mainly including natural gas, biomass fuel, gasoline and diesel, etc.), indirect emissions are 10341tCO₂(mainly electricity emissions), with a combined GHG emission of 12112.5 tCO₂.

Green Procurement

Supplier audit: in 2020, according to the requirements of the "qualified supplier evaluation and management measures" to carry out on-site audit of product suppliers, by the supply chain management team to organize the quality assurance department, design department, process department, product manufacturing department, equipment and information department, procurement center from the supplier research and development capabilities, product process control, equipment management, production management, warehouse management, secondary supplier management, after-sales service and other aspects of audit.

In 2020, 199 suppliers will have 46 major suppliers, accounting for 90% of the purchase amount, 38 of the major suppliers will obtain environmental management system certification, 32 will obtain energy management system certification, and all suppliers will obtain quality management system certification.

• Social Responsibility Report

The "Flying Ball" brand motors produced by Jiamusi Electric Co., Ltd. are mainly used in petroleum, chemical, coal, steel, metallurgy, transportation, electric power, aerospace and other fields. The products are all over the country and exported to more than 40 countries and regions. The industry, satellite launch, nuclear power plant, Three Gorges Project, Antarctic Great Wall Station, national defense construction and other high-tech fields provide excellent driving force. The company has undertaken a number of national, provincial and ministerial scientific research plans, and its products have won national, provincial and ministerial scientific and technological progress awards for many times. In December 2011, with the approval of the Ministry of Science and Technology, the "National Explosion-proof Motor Engineering Technology Research Center" was established with Jiamusi Electric Co., Ltd. as the support unit, marking that the company has a core and leading position in the explosion-proof field in my country, leading the development of the industry direction.

Over the years, Jiadian Company has earnestly fulfilled its social responsibility and has been doing an enterprise with a sense of social responsibility, taking common interests above all else as the spirit of enterprise, organically unifying economic development and fulfilling social responsibility, taking corresponding economic, environmental and social responsibility as a conscious behavior, and taking corporate social responsibility as the basis for improving competitiveness. It has won the recognition of governments at all levels, consumers and all sectors of society. Specific practices are as follows:

1. Changing Ideas and Constructing Social Responsibility System

With the continuous development of economic globalization and market economy, corporate social responsibility can improve corporate efficiency; win reputation and establish a good image; reflect corporate cultural orientation and values; be conducive to sustainable development and improve the quality of life of the public; be conducive to maximizing the interests of stakeholders; become the basis for enhancing strength and competition, and be recognized by more and more enterprises. In view of the current international and domestic situation, enterprises assume social responsibility and establish a sound social responsibility system, which has become the general trend and the will of the people. The group company vigorously promotes the social responsibility system and changes its ideas, so that the concept that enterprises without a sense of social responsibility cannot stand firm in the increasingly fierce competition penetrates into all aspects of the enterprise, and promotes the establishment of the social responsibility system and the enterprise itself. development.

2. Vigorously Develop Economy, Ease Employment Pressure

The group has 1796 employees, including 1269 professional and technical personnel. In the face of increasingly fierce market competition at home and abroad, in accordance with the "equipment modernization, industrial scale, high-grade products," the goal.

At present, the local economy has been developed, part of the employment pressure has been solved, the unstable factors of social security have been reduced, and the social responsibility of enterprises has been fulfilled.

3. Strengthen Scientific Management, Pay Attention to Environmental Protection

The company has successively passed the "four-in-one" management system certification of ISO9001 quality management system, ISO14001 and environmental management system, OHS18001 occupational health and safety management system, and energy management system. The protection of the surrounding environment and the health and safety of employees reflects the social responsibility of enterprises. Since the establishment of the system, the company has not had any production accidents, equipment accidents, and has not received any environmental complaints. The company's products have passed the national compulsory product 3C certification, further improving the quality of electrical products and green production.

The company established a quality management system in 1996 and successfully passed the ISO:9001 quality system certification in July of the same year. Since the operation of the system, our company has taken the satisfaction of users as its aim, ensuring that the qualified rate of one-time inspection of products is above 98%, the satisfaction rate of users is above 98%, and the satisfaction rate of users' return visits is above 98%.

The company has carried out clean production and energy saving and consumption reduction activities. Jiamusi Electric strictly abides by the national laws and regulations on environmental protection, and strictly implements the "Waste Water and Waste Liquid Discharge Control Procedure", "Waste Gas Discharge Control Procedure", "Oil Pollution Prevention Management Procedure" and "Waste" Management Standard ", promotes dust reduction and noise reduction through strengthening management, optimizing process layout, and equipment transformation, effectively control the impact of production noise and dust on the surrounding residents and the environment. In 2020, 21 energy-saving and emission-reduction projects will be carried out, with a total expenditure of 11.79 million billion yuan for energy-saving and emission-reduction, a pollutant emission compliance rate of 100 percent, a steady decline in the total discharge of various pollutants, and no environmental accidents occurred throughout the year. It has improved the overall management level of the company, increased the intensity of pollution control, improved the employees' awareness of energy saving and consumption reduction, and achieved the goal of "energy saving, consumption reduction, pollution reduction, and efficiency.

4. people-oriented, care for workers

The group company has always pursued the "people-oriented" management concept, which unifies the personal values of employees and the values of the enterprise, and shapes the corporate culture with the pursuit of quality as the core. The signing rate of labor contracts between the company and its employees has reached 100 per cent, and it has provided social old-age insurance, unemployment insurance, medical insurance, work-related injury insurance, maternity insurance and other insurance for its employees, and regularly organized physical examinations for its employees to protect their legitimate rights and interests.

The style of an enterprise is the dominant expression of enterprise culture. "The upper and lower effects are called wind, and the stability of the hearts of the people is common". The construction of the apartment project actively creates an atmosphere for employees to live and work in peace and contentment; the company invests a lot of financial, material and manpower to build a cultural center to provide a good environment for learning and entertainment for the majority of employees; constantly improve the accommodation conditions of employees, and diversify the dormitory hotel and meals; actively organize employees to participate in theatrical performances, sports competitions, etc., so that the enterprise has formed a good situation of unity and forge ahead, Create a brilliant. Implement a strict reward and punishment system to effectively guarantee the economic income of the majority of employees; in order to effectively maintain the personal safety of the majority of employees, strengthen labor safety awareness and safety inspection, strengthen safety education and safety training, and enhance employees' awareness of occupational safety, self-protection, and Compliance with regulations and disciplines; gradually improve employee welfare benefits, first focus on improving employees' working ability and production skills, adopt different forms such as "please come in" and send out training to train management personnel, improve the overall quality of employees, increase labor productivity, and promote the rapid development of enterprises; organize and carry out "improve ideological and moral quality, improve scientific and cultural quality, and improve body A series of cultural and sports activities with the theme of" health quality "strive to use various forms of cultural and sports activities to cultivate, shape and unite employees. For example, in April this year, a colleague was hospitalized for illness, and the huge medical expenses overwhelmed the whole family. Upon learning of this, the group's party committee, labor union, youth league committee and all employees spontaneously donated more than 200,000 yuan to help them tide over the difficulties. It carries forward the fine tradition of Shengtong people of "difficulties on one side, support from all sides", and shows the warmth of the collective and the sense of responsibility of the enterprise.

5. are keen to devote themselves to social welfare undertakings and give full play to corporate social responsibility.

After the earthquake, the group company, party members and all employees enthusiastically donated more than 100,000 yuan, dedicated people's love; funded education; helped needy families in nearby villages; subsidized college students with difficult family financial conditions, so that the entire society Feel the various benefits brought by enterprise development. The residential area was developed on the north side of the town government. While implementing the project construction, it solved the problem of residential housing and contributed to the construction of civilized towns, which fully reflected the corporate social responsibility.

6. strengthen the construction of corporate integrity and implement corporate social responsibility

While gradually developing and growing, Jiadian Company constantly attaches importance to the construction of integrity, innovates the mode of integrity management, formulates the goal of integrity construction, and establishes the integrity management system. The company through a variety of ways to understand and obtain relevant credit information, so that the basic work of credit management has been strengthened. At the same time, the company also takes the tax management work of the enterprise seriously, and strives to achieve the organic combination of paying taxes in accordance with the law and standardizing the operation of the enterprise, enhancing the reputation of the enterprise and reflecting the value of the enterprise. The company pays taxes in good faith in accordance with the law, winning a higher business reputation and more business opportunities for the company. The company has been rated as a "contract-abiding and trustworthy enterprise" for consecutive years, and has been recognized as an "inspection-free enterprise" for consecutive years. It has also entered the list of "National Integrity Unit Honor List", and has successively won the "China Quality Service Integrity Enterprise AAA", "National Integrity and Law-abiding Enterprise" and many other honorary titles.

The company strictly implements the relevant national laws and policies, implements the principle of small profits but quick turnover and serves the society for product sales, understands the market situation of products by subscribing to publications, online inquiries and other ways, starting from protecting the interests of consumers, always keeping a balance with the market price, and never deceive consumers by driving up prices and strategic dumping. Treat the vast number of consumers in good faith, effectively maintain the company's reputation and image.

Problems to be Solved in the Implementation of Corporate Social Responsibility

As a member of the social group, the enterprise must bear a certain responsibility to the society. If the enterprise fulfills its social responsibility, it will promote the development of the society, which in turn will better promote the development of the enterprise itself. The company will consciously fulfill social responsibility as a pursuit of the enterprise, in the implementation, we still need to do the following:
1. comprehensive and systematic understanding of corporate social responsibility needs to be improved; attention and investment in social welfare undertakings need to be increased.

2. internal staff relations more harmonious, more reasonable distribution, to achieve the fairness of the employee performance appraisal system, better play the enthusiasm of the company's technical talents and other issues, should be further studied.

3. the company's product technology research and development capabilities still need to continue to strengthen and improve, product sales channels to expand in depth.

Under the opportunity of carrying out the theme education activity of "responding to the international financial crisis and fulfilling corporate social responsibility", combined with the actual situation, we should do a good job in implementation, absorb the experience and practices in the work, and lay the foundation for better exerting the social responsibility of the group company.

4. 2021-2023 Green Supply Chain Development Plan

Jiamusi Motor Co., Ltd.

Green supply chain in the medium and long termdevelopment planning

The "Flying Ball" brand motors produced by Jiamusi Electric Co., Ltd. are mainly used in petroleum, chemical, coal, steel, metallurgy, transportation, electric power, aerospace and other fields. The products are all over the country and exported to more than 40 countries and regions. The industry, satellite launch, nuclear power plant, Three Gorges Project, Antarctic Great Wall Station, national defense construction and other high-tech fields provide excellent driving force. The company has undertaken a number of national, provincial and ministerial scientific research plans, and its products have won national, provincial and ministerial scientific and technological progress awards for many times. In December 2011, with the approval of the Ministry of Science and Technology, the "National Explosion-proof Motor Engineering Technology Research Center" was established with Jiamusi Electric Co., Ltd. as the support unit, marking that the company has a core and leading position in the explosion-proof field in my country, leading the development of the industry direction. While actively seeking development, the company pays attention to environmental protection, resource conservation and sustainable development. In order to implement the "Made in China 2025", with green development as the core and building a green supply chain as the goal, the green supply chain medium and long-term plan has been formulated. The annual target and implementation plan of green supply chain construction are as follows.

(1) Annual target for 2021

① Appoint the top management representative of the green supply chain, establish the green supply chain promotion management organization of Jiamusi Electric Co., Ltd., and establish and improve the green supply chain management and evaluation mechanism;

② Carry out green supply chain and green supply chain training based on the green supply chain and green supply chain evaluation indicators of the Ministry of Industry and Information Technology.

③ Based on the green supply chain evaluation index of the Ministry of Industry and Information Technology, self-evaluation and third-party evaluation are carried out, and green supply chain declaration is carried out at the same time;

Implementation Scheme

① In order to build a green supply chain, Jiang Qinghai was appointed as the top management representative of the green supply chain, mainly responsible for assigning responsibilities and authorities related to the green supply chain, ensuring the acquisition of relevant resources, and promising and ensuring that the evaluation requirements of the green supply chain are met. At the same time, the establishment of a green supply chain promotion team, composed of the main heads of various departments, is mainly responsible for the development of green supply chain related system documents, the development of green supply chain performance, assessment of members' work results. A member unit of the green supply chain promotion group is set up under the promotion group to be responsible for completing the annual green supply chain construction tasks;

② Based on the green supply chain evaluation indicators of the Ministry of Industry and Information Technology, comprehensively improve the company's internal management documents, including energy measurement and energy conservation management. According to the concept of green supply chain, the company's infrastructure, management system, energy resources, procurement, environmental emissions and other aspects of the overall planning and improvement;

③According to the requirements of the Ministry of Industry and Information Technology to declare the green supply chain, organize the self-evaluation and third-party evaluation of the creation of the green supply chain; according to the requirements of the Ministry of Industry and Information Technology to declare the green supply chain, organize the declaration of the creation of the green supply chain;

④ In order to understand the guidelines for the construction of the green manufacturing system and deepen the green manufacturing concept of employees, the green supply chain promotion team organizes relevant departments to carry out green manufacturing training, and the number of training is not less than 2 times.

(2)2022

Annual target

① Carry out green supply chain operations and summarize the experiences and challenges of creating and operating a green supply chain. Achieve at least one performance optimization;

② Formulate, optimize and improve the implementation plan of green supply chain.

Implementation Scheme

① Under the guidance of the Green Supply Chain Promotion Group, the green supply chain is fully operated, and the member units of the Green Supply Chain Promotion Group are responsible for collecting, summarizing, comparing and analyzing the relevant performance of the green supply chain creation. Specifically, it includes the following aspects: the consumption of main raw materials per unit product, the production of main pollutants per unit product, the production of wastewater per unit product, the comprehensive utilization rate of industrial solid waste, the reuse rate of wastewater treatment, the comprehensive energy consumption per unit product and the unit product Carbon emissions, etc.

② The Green Supply Chain Promotion Team organizes relevant departments to study the formulation of implementation plans related to the green supply chain.

(3)2023

Annual target

① Organize and carry out green supply chain re-evaluation;

Promote a green supply chain management system based on green supply chain practices;

③ Carry out green supply chain operation and summarize the experience and challenges of green supply chain construction.

Implementation Scheme

① In order to evaluate the overall creation effect and construction of the green supply chain, the green supply chain promotion team organizes experts to conduct a second evaluation of the company, and compare the first evaluation, summarize the successful experience of factory construction, and continue to improve the shortcomings;

② Improve the green supply chain management mechanism, clarify the person in charge and the corresponding responsibilities and objectives, and implement continuous improvement of green supply chain operation management;

③ Summarize the management mode and experience of green supply chain creation, and put forward problems and countermeasures

green supply chain management organization:

Main duties, responsibilities and authorities:

1. General Manager: The overall planning of the green supply chain management organization and the allocation of required resources shall bear the ultimate responsibility for the management of hazardous substances; negotiate with customers on major issues related to the management of hazardous substances.

2. Management representative: plan and establish a green supply chain management system, report the operation situation and suggestions for improvement to the senior management, and be responsible for the coordination and handling of green supply chain management matters among various departments.

3. Safety, Technology and Environmental Protection Department: audit and continuous improvement of the system operation; The daily management of hazardous substances corresponding to customers meets the requirements of customers. Responsible for updating customer requirements and documents on hazardous substances, responsible for organizing the company's learning and training on the management of hazardous substances.

4. Procurement Center: to carry out investigation, evaluation and management on the green supply chain management of suppliers, to collect relevant intelligence and information, to be responsible for requesting relevant reports of materials from suppliers and to sign chemical substance-free guarantees from all suppliers, to ensure that the purchased materials conform to laws and regulations and customer requirements, and to implement green procurement; Effective management of raw and auxiliary material warehouses; Organize review and implementation of customer requirements, effective management and protection of finished products to ensure effective management of the delivery process.

5. Ministry of Internal Trade: liaise, communicate and coordinate with customers and the company on green supply chain management information, and liaise, communicate and coordinate with customers on the company's green supply chain. Ensure that the customer's reasonable requirements are understood and met.

6. Product manufacturing department: manage and control harmful substances in the process of product production and manufacturing to ensure that products are not polluted and confused and meet customer requirements; implement green manufacturing. Implement relevant laws and regulations and customer requirements for hazardous substance management in the process of new product production, production process, packaging style determination, etc.

7. Quality Support Department: daily management, supervision and audit of suppliers; Inspection, verification and analysis of harmful substances in incoming and outgoing products; Responsible for the monitoring of harmful substances corresponding to customers, as well as the handling and emergency response of non-conforming products. Ensure that customer requirements are met.

8. Securities Department: release of corporate social responsibility report

9, equipment and information department: energy conservation and emission reduction environmental compliance, green supply chain management information platform improvement, disclosure of enterprise energy conservation and emission reduction carbon reduction information.