In the process of creating a green supply chain, Jiamusi Electric Co., Ltd. carried out energy-saving transformation of steam boilers, using biomass fuel instead of raw coal, and the annual consumption of biomass particles accounted for the proportion of total energy consumption.58.5 per cent, while also making full use of renewable energy to replace non-renewable energy.

2. Emission reduction and carbon reduction information

(1) Air pollutants. The factory regularly tests environmental emissions every year. In 2020, Heilongjiang Keyang Testing Technology Co., Ltd. will be entrusted with the test report of boiler exhaust gas, drying furnace in electrical workshop after dust removal and spray bag workshop (report number: KYJC-W1924S1224；KYJC-W1924Q1224) After testing, the emission of air pollutants meets the requirements of relevant national and local standards, and the implementation standards of exhaust gas are based on the Comprehensive Emission Standard of Air Pollutants (GB16297-1996) and the Emission Standard of Air Pollutants for Boilers (GB13271-2014).

FigureAir Pollutant Test Report

Among them, the emission concentration of particulate matter, sulfur dioxide, nitrogen oxides and other pollutants at the outlet of the boiler exhaust pipe meets the "Boiler Air Pollutant Emission Standard" (GB13271-2014), the emission rate of coal-fired boilers meets the requirements of the "Comprehensive Emission Standard for Air Pollutants" (GB16297-1996) above the second level; the emission concentration of pollutants from the production workshop is lower than the "Comprehensive Emission Standard for Air Pollutants" (GB16297-1996) Emission limit.

(2) Water pollutants. The factory regularly tests the water body every year. In 2020, Heilongjiang Keyang Testing Technology Co., Ltd. was entrusted to issue a wastewater test report. According to the "Water Quality Standard for Sewage Discharge into Urban Sewers" (GB/T31962-2015) and "Sewage" "Comprehensive Discharge Standard" (GB8978-1996), the discharge of water pollutants from the factory meets the requirements of relevant national and local standards. Among them, the discharge concentrations of pollutants such as chemical oxygen demand, suspended solids, and ammonia nitrogen at the total discharge outlet of wastewater all meet the requirements of the first-class standard in the "Integrated Wastewater Discharge Standard" (GB8978-1996).

TableWater pollutant detection index parameters (according to the Integrated Wastewater Discharge Standard)

(3) Solid waste, the factory's general solid waste mainly includes metal scrap, etc., which is now recycled by waste recycling companies (Jiamusi Xinyi Steel Co., Ltd. and Jiamusi Zhongwei Industrial Co., Ltd., etc.); hazardous solid wasteThird-party enterprises with capabilities and qualifications (Heilongjiang Yunshui Environmental Technology Service Co., Ltd., Qitaihe Longfa Bio-oil Technology Research and Development Co., Ltd. and Qitaihe Longfa Bio-oil Technology Research and Development Co., Ltd.) were entrusted to dispose of the disposal, and the disposal process implemented the joint order system..

Industrial solid waste treatment agreements, contracts and documented processing unit qualification documents and other information is complete, solid waste treatment in line.GB18599-2001 the requirements of Pollution Control Standards for Storage and Disposal Sites of General Industrial Solid Wastes and relevant standards.

FigureBusiness License of Hazardous Waste Disposal Unit

(4) Noise factory, the noise mainly comes from mechanical processing equipment in the production process and fan operation in environmental protection treatment facilities. According to the 2019 factory boundary noise detection report issued by Heilongjiang Keyang Detection Technology Co., Ltd., the factory boundary noise meets the Class 1 standard of GB 12348-2008 "Environmental Noise Emission Standard for Industrial Enterprises" (day: 60dB(A), night: 55dB(A).

FigureNoise Monitoring Report

Greenhouse gas emissions, the factory in accordance with the "Enterprise Greenhouse Gas Emission Accounting Methods and Reporting Guidelines (Trial)" within the scope of the plant to account for greenhouse gas emissions, and issue the corresponding self-examination report.Combustion emissions of 1771.5 tCO in 2020₂(mainly natural gas, biomass fuels, gasoline and diesel, etc.), indirect emissions are10341tCO₂(mainly electricity emissions), with aggregate GHG emissions12112.5 tCO₂.

Human Resources Department:0454-8326115 Securities Department:0454-8848800
Add: No.247.Chang'an East Road, Qianjin District, Jiamusi City, Heilongjiang Province

Human Resources Department:0454-8326115 Securities Department:0454-8848800
Add: No.247.Chang'an East Road, Qianjin District, Jiamusi City, Heilongjiang Province

Business License